Your Basket

Your basket is empty.

312e9a10c596d3e0cd3487e3a6b162f4
Back

8 Inch Victorian Slimline Door Knocker - Lifetime Coating Guarantee



Loading 360° Product View
  • Click to enlarge

£10.99

QTY
Product Information
Fitting Instructions
Guarantee

It is no secret that a decorative, ornamental door knocker can really improve and enhance the overall appearance of an entrance door, and add substantial value onto a property. The 8 inch slimline door knocker adds class and style to any front door as they are universally appealing and aesthetically pleasing. With its slim vertical profile the 8” slimline Victorian urn is ideal for doors with planks, panels or mouldings and their timeless, elegant appearance means that they are always in demand.

The exquisite 8 inch Victorian slimline urn from UAP has bolt through fixings, and is ideal for all composite and wooden doors where there is a larger door face. Each knocker comes with 2 colour matching solid brass nuts and washers for effective colour matching. The door knocker is fitted onto the door using revolutionary nylon bolts, which can fit door thicknesses of up to 75mm. They are incredibly easy to cut down to size if needs be, and all you need is a stanley knife - so no more sawing!

Door Knocker Features:

1 Classic Victorian style look - common on a lot of doors
2 Made from 316 grade stainless steel
3 Lifetime coating guarantee anywhere in the country
4 Comes with colour matched nuts and washers
5 Easy to cut flexi nylon bolts will never rust
6 Available with or without a door viewer (spyhole)

Live Near The Coast?

Products pitting and rusting near the coast is a very common problem due to the salt in the air

If you live near the coast (defined as within 25 miles away) or within 5 miles of a heavily populated industrial area, it is a very common problem for door hardware to pit and rust (usually within 6 months of it being fitted). The high concentration of salt and chemicals in the air corrodes most metals including brass, zinc, zamak, nickel and more.

UAP have developed a range of products developed specifically for the coast - called Nanocoast. These products are made from 316 grade stainless steel, and have been salt spray tested to ASTM B117:2005 for 2000+ hours (the industry standard is 480 hours).

UAP are so confident with the quality of their Nanocoast products that they offer a LIFETIME coating guarantee, meaning that they will not pit or rust no matter where you put them in the country! 

Technical Information

Door knocker height 195mm
Door knocker width 53mm
Door knocker thickness 11mm
Distance between fixing bolts (vertical) 140mm
Distance between top bolt and door viewer 55mm
Door viewer hole size (and drill bit size required) 12mm

Fitting With A Door Viewer

We supply a colour match door viewer if requested

Made with a solid brass body and comprising of 3 plastic lenses, each door viewer ensures to give crystal clear performance for years of safe, secure use.

Each door viewer has been awarded the 'Secured by Design' approval by the Association of Chief Police Officers, giving you extra piece of mind.

We have a range of door viewer sizes, in a range of 6 different colours. As standard, we supply a door viewer for door thicknesses between 35-55mm (for composite or wooden doors.)

If you require a smaller 20-35mm viewer (for uPVC doors) please put a note on to your order and we will be happy to supply you with the smaller viewer.

 

Fitting Instructions

Fitting Your Door Knocker

With your door knocker you will find enclosed a door knocker drill template for your door.

1. Cut this out and line up the template straight on your door. Mark on your door the two drill holes from the template (and door viewer hole if needed).

2. When drilling the holes through the door, we recommend that you use a 6mm drill bit for the nylon bolts, and a 12mm drill bit for the door viewer. Drill from the outside of the door inwards.

3. Once you have drilled the holes, please make sure that the flexi nylon screws supplied with the door knocker fit through the two holes.

4. Screw the 2 flexi nylon screws onto the door knocker and position through the holes on the door. This should cause the flexi nylon screws to be protruding out on the inside of the door.

5. Use a stanley knife to cut down the threads to size. We recommend leaving a 7-8mm overhang for the bolts to be threaded to.

6. Place the metal washers on the flexi screws first, and tightly thread on the 2 coloured bolts. This will secure your door knocker onto the door.

Cleaning Your Door Knocker

Every month, wipe the door knocker over with a moist cloth and remove any dust particles that may have accumulated.

Pay particular attention to any moving parts around the striker arm, and finish off by wiping the door knocker with a lint free cloth.

DO NOT USE ANY ABRASIVE CLEANING MATERIALS AT ALL AS THEY WILL DAMAGE THE PROTECTIVE COATINGS

Door Knocker Guarantee

We guarantee the door knocker and finish against the following;

Surface Coating

We guarantee that the door knockers have a lifetime coating guarantee subject to;

1. The door knockers are applied to a door, window frame or door.

2. The door knockers are fixed correctly and are not scratched or damaged at any time during the installation process or thereafter.

3. The door knockers are cleaned monthly with a moist cloth and not with any form of cleaning agents.

4. No claim will be accepted for any door knockers that is scratched or mutilated or fitted incorrectly.

Mechanical

We guarantee that the door knockers will not fail mechanically in normal use during the 5 year guarantee period subject to the conditions outlined above.



Customer Reviews

This product hasn't been reviewed yet.

Write a review

Write Review

Please enter a valid email address.
This field is required.
Top